Description
FEATURES
- 136 dB peak SPL
- 15″ Differential Drive® low-frequency driver for low-distortion and higher SPL
- 1.5″ diameter next generation JBL neodymium compression driver
- JBL designed waveguide for accurate coverage
- Efficient Class-D amplifier technology
- Optimized EQ for monitor or front-of-house applications
- DSP input section, crossover, dynamic limiting, component optimization, selectable system EQ
- Line level and direct microphone input capability
- Professional XLR-1/4″ combination inputs, RCA inputs, and XLR loop-through
- Multi-angle enclosure for main PA or floor monitor applications
- Integrated 36 mm pole mount socket with angle down tilt
- Injection molded handle with backing cup for easy transport
- Integrated M10 suspension points for easy setup
- Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL’s tour proven DuraFlex™finish.
- Cloth backed, dent-resistant 16 gauge steel grilles
SPECIFICATIONS
| Power Rating | 1500 W | |
| AC Power Input | 100V – 240V~ 50/60 Hz | |
| Frequency Range (-10 dB) | Main: 42.9 Hz – 19.5 kHz Monitor: 43.6 Hz – 19.3 kHz |
|
| Frequency Response (±3 dB) | Main: 58.1 Hz – 17.2 kHz Monitor: 60.7 Hz – 16.7 kHz |
|
| Coverage Pattern | 90° x 50° nominal | |
| Directivity Index (DI) | 10.2 dB | |
| Directivity Factor (Q) | 10.4 | |
| Crossover Frequency | 1.7 kHz | |
| Maximum SPL | Normal: 136 dB Boost: 136 dB |
|
| Signal indicators | Limit: Yellow LED indicates peak output has been reached and dsp limiter is acting Signal: Green LED indicates signal present Power/Standby: Blue indicates system has power and ready to pass audio, Red indicates system has power but is in a power saving mode and will not pass audio. |
|
| Dynamic Control (Input) | dbx Type IV™ limiter circuit | |
| Input Impedance | 20K Ohms (balanced), 10K Ohms (unbalanced) | |
| LF Driver | 1 x JBL 275G (15 in) woofer | |
| HF Driver | 1 x JBL 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver | |
| Enclosure | Asymmetrical, 18 mm, plywood | |
| Suspension / Mounting | Dual 36 mm pole socket, 12 x M10 Suspension Points | |
| Transport | 1 x injection molded handles with backing cup | |
| Finish | Obsidian DuraFlex™ finish | |
| Grille | Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing. | |
| Input Connectors | 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input | |
| Output Connectors | 1 male XLR balanced output | |
| Dimensions (H x W x D) | 714.43 mm x 445.13 mm x 358.71 mm (28.13 in x 17.52 in x 14.12 in) |
|
| Net Weight | 21.6 kg (47.5 lb.) |
Reviews
There are no reviews yet.