Description
Features
- A full-size MS-20 that you can assemble yourself
- Both the early and late versions of the filter are provided
- Overseen by the engineers of the original MS-20;
a complete replication of the original analog circuitry:
– 2VCO / 2VCA / 2VCF / 2EG / 1LFO structure
– External signal processor (ESP)
– Extremely flexible patching system - MIDI IN and USB connector
- Powered by an AC adapter
- Replicates every detail of the original, down to the package binding and the included manual
Specifications
- Keyboard
- C – C: 37-key (3 octaves)
- Main Controller:
- Control wheel (center click)
Momentary switch –>GND
- Input/Output
- Signal input (Monoral Phone Jack), Signal output (Monoral Phone Jack, 2V p-p output impedance 3.5k Ω), Head phones output (Stereo Phone Jack, 33 Ω 48mW), DC12V, MIDI IN, USB(Type B)
- Power Consumption:
- 9W
- Power Supply:
- DC12V
- Dimensions:
(W x D x H) - 573 × 316 × 248 mm / 22.56 x 12.44 x 9.76 inches
- Weight:
- 6.3 kg / 13.89 lbs.
- Accessories:
- AC adaptor (12V/1.5A), Patch Cord x 10
Specifications
- Control Section
- 1. Keyboard
- : C ~ C 37Keys(3 octaves)
- 2. Voltage Controlled Oscillator 1 (VCO 1)
- : Scale (32′, 16′, 8′, 4′) (6 octaves, +cent, -cent)
: Wave form(Triangle, Sawtooth, PW-Square, White Noise) (4 modes)
: Pulse width adjust 1:1 ~ 1:infinity
- 3. Voltage Controlled Oscillator 2 (VCO 2)
- : Scale (16′, 8′, 4′, 2′) (6 octaves, +cent, -cent)
: Wave form(Sawtooth, Square, Pulse, Ring modulator) (4 modes)
: Pitch( ± 1 octave)
- 4. VCO Master control : Master tune( ± 100cent)
- : Portamento(max. 10sec)
: Frequency modulation intensity by MG/T.EXT(-5V ~ +5V)
: Frequency modulation intensity by EG1/EXT(-5V ~ 0V)
- 5. VCO Mixer
- : VCO 1 Level
: VCO 2 Level
- 6. Voltage Controlled High Pass Filter (VCF HPF)
- : Cutoff frequency(50Hz ~ 15,000Hz)
: Peak(flat ~ self OSC)
: Cutoff frequency modulation intensity by MG/T.EXT(-5V ~ +5V)
: Cutoff frequency modulation intensity by EG2/EXT(-5V ~ +5V)
- 7. Voltage Controlled Low Pass Filter (VCF LPF)
- : Cutoff frequency(50Hz ~ 15,000Hz)
: Peak(flat ~ self OSC)
: Cutoff frequency modulation intensity by MG/T.EXT(-5V ~ +5V)
: Cutoff frequency modulation intensity by EG2/EXT(-5V ~ +5V)
- 8. Envelope Generator 1
- : Delay time(10sec)
: Attack time(10sec)
: Release time(10sec)
- 9. Envelope Generator 2
- : Hold time(20sec)
: Attack time(10sec)
: Decay time(10sec)
: Sustain level(0V ~ 5V)
: Release time(10sec)
- 10. Modulation Generator (LFO)
- : Wave form(Negative Sawtooth ~ Triangle ~ Positive Sawtooth, Wide Pulse ~ Square ~ Narrow Pulse)
: Frequency(0.1Hz ~ 20Hz)
- 11. Manual controller
- : Cntrol wheel(center click)
: Momentary switch –>GND
- 12. Power switch and Volume
- : Volume
- 13. Indicator
- : LED(KBD trigger, Modulation Generator rate, Power ON)
- External Signal Processor
- 1. Control section
- : Input signal level
: Low cut frequency(50Hz ~ 2,500Hz)
: High cut frequency(100Hz ~ 5,000Hz)
: CV adjust
: Threshold level
- 2. Input and Output
- : Signal In
: Amplifier Out
: Band pass filter Out
: CV Out(0 ~ +8.4V)
: ENV Out(0 ~ +5V)
: Trig Out(+5V–>GND)
- 3. Indicator(LED)
- : Peak indicator
: Trigger indicator
- Patch Panel
- 1. Keyboard
- : Keyboard control voltage output(Exponential) (0 – +8V)
: Keyboard trigger output(+5V–>GND)
: VCO-1 + VCO-2 control voltage input(Linear response)(0 – +8V)
: VCO-2 control voltage input(Linear response) (0 – +8V)
- 2. VCO
- : VCO-1 + VCO-2 external frequency control input(OCT/V)(-5V – +5V)
- 3. VCF
- : External signal input(3Vp-p max.)
: External High pass filter cutoff frequency control input(2OCT/V)(-5V – +5V)
: External Low pass filter cutoff frequency control input(2OCT/V)(-5V – +5V)
- 4. VCO + VCF
- : Total external modulation input(T.EXT)(-5V – +5V)
- 5. VCA
- : External initial gain control input(0 – +5V)
- 6. EG
- : EG 1 envelope signal normal output(0V – +5V)
: EG 1 envelope signal reverse output(+5V – 0V)
: EG 1 + EG 2 trigger input(–>GND)
: EG 1 trigger input(–>GND)
: EG 2 envelope signal reverse output(+5V – 0V)
- 7. MG
- : Triangle output(Negative Sawtooth – Triangle – Positive Sawtooth)(5Vp-p)
: Rectangle output(Wide Pulse – Square – Narrow Pulse)(0 – +5V)
- 8. Noise Generator
- : Pink noise output(5Vp-p)
: White noise output(5Vp-p)
- 9. Sample and Hold
- : Clock trigger input(–>GND)
: Sample signal input(5Vp-p max.)
: S/H output(5Vp-p max.)
- 10. Modulation VCA
- : Control voltage input(0 – +5V)
: Signal input(-5V – +5V)
: Signal output(-5V – +5V)
- 11. Manual controller
- : Control wheel output(-5V<–0V–>+5V)
: Momentary switch output(–>GND)
- 12. Signal out
- : Signal output(2Vp-p output impedance 3.5k Ω )
- 13. Head phones
- : Head phones output(33 Ω 48mW)
- 14. USB
- : Type B, USB-MIDI Input/Output
*Only note messages (velocity is not used) can be transmitted and received.
- 15. MIDI
- : MIDI Input
*Only note messages (velocity is not used) can be transmitted and received.
Reviews
There are no reviews yet.