Out of Stock!

KORG ARP ODYSSEY MODULE 1 SYNTHESIZER

The ARP ODYSSEY Module is a keyboard-less ARP ODYSSEY with the very same analog synthesis circuitry that completely reproduces the original. To fit perfectly in today’s DAW-centric music production environments, KORG provide it in a more compact module form.

42,869.00

Out of Stock!

Confirm the availability now!
Category:

Description

Since its appearance in 1972, the ARP Odyssey has been loved by countless musicians as a classic analog synthesizer. Forty years later, in 2015, with the advisory assistance of David Friend, co-founder of the ARP Instruments company, KORG resurrected the ARP ODYSSEY with a complete reproduction of the ARP Odyssey’s original circuitry. The ARP sound, which continues to be envied as an iconic analog synthesizer, was once again back in the hands of today’s musicians. Now, KORG has further broadened the reach of the ARP ODYSSEY in today’s world by releasing a new model.

The ARP ODYSSEY Module is a keyboard-less ARP ODYSSEY with the very same analog synthesis circuitry that completely reproduces the original. To fit perfectly in today’s DAW-centric music production environments, KORG provide it in a more compact module form. The real ARP sound that transcends history is once again available to the world.

The ARP ODYSSEY Module lineup includes the best-known Rev1 design with its characteristic black panel and orange silk-screening, as well as the white-paneled Rev1 design that marks this instrument’s historic beginning. The unique shape of the slider grips, their smooth operating feel, and the layout of the switches all perfectly reproduce the layout of the original despite the compact module design.

The body, on the other hand, has been redesigned for its new life in module form, featuring a sturdy steel chassis befitting the weighty sounds produced by this instrument throughout its forty-year history.

FEATURES:

  • 2VCO. The duophonic design allows two different pitches to sound when you play two notes.
    * The high degree of pitch stability for which the ARP Odyssey was remarkable in its time has been perfectly reproduced.
    * Pitch is variable over a wide range of 20 Hz–2 kHz.
  • Pitch modulation and pulse width modulation can be controlled.
  • Oscillator sync provides sharp, great-sounding overtones extending into a high range.
  • Noise generator provides two noise types: white and pink
  • Powerful LFO can be used as a modulation source for the oscillator or filter, or as a trigger source for sample & hold.
  • * Ring modulator generates metallic sounds with rich overtones.
  • The distinctive S/H MIXER lets you easily create sample & hold sounds by using the oscillator or noise generator as a source that’s triggered by the LFO or keyboard.
  • A wide variety of modulation sources such as S/H, LFO, ADSR, and AR can be used to modulate the filter.
  • A high-pass filter is provided following the low-pass filter, giving you even broader sound design possibilities.
  • A new function, the DRIVE switch generates extreme and aggressive sounds.
    * VCA GAIN slider leaves the note sustaining. Ideal for sound design.
  • The three types of low-pass filter found on different production runs of the original ARP Odyssey are all provided. With a single switch you can select any one of these filters with their differing characteristics: TYPE I (Rev1) is a 12 dB/octave filter with a sharp and punchy sound, TYPE II (Rev2) is a 24 dB/octave filter that’s great for thick low sounds, and TYPE III (Rev3) features excellent stability even when the resonance is increased.
  • * Envelope generator with two types: ADSR and AR. This can be used not only for the VCA but also to modulate the filter or oscillator.

SPECIFICATIONS:

  • Maximum Polyphony: 2 voices for duophonic; normally monophonic
  • Controllers
    • Transpose Positions: 2 octaves down, normal, 2 octave up
    • Proportional Pitch Control: b (Pitch down) Pad: about -2 / 3 octave ,– (Modulation) Pad ,# (Pitch-up) Pad: about +2 / 3 octave
  • Noise Generator: Noise Spectrum Types (white and pink)
  • Portamento
    • Maximum Speed: about 0.01 msec./oct
    • Minimum Speed: about 1.5 sec./oct
  • VCO (Voltage Controlled Oscillator)
    • Waveforms: Sawtooth, Square, Pluse (Dynamic Pluse)
    • Frequency Range: VCO-1 in low freq. mode, 0.2 Hz – 20 Hz: VCO-1 and VCO-2 (audio range) about 20 Hz – 20 kHz
    • Warm Up Drift: 1/30 semitone from turn on max
    • Pulse Width: 50 % – 5 %
    • Pulse Width Modulation
      • ADSR, +45 %
      • LFO, +15 %
    • Voltage Controlled Response: 1 V/oct
    • Maximum Frequency Shifts
      • LFO sin wave, +1/2 oct. 
      • LFO square wave, +1.5 oct. 
      • ADSR, +9 oct. 
      • S/H, +2 oct.,* VCO-1 is low note priority, VCO-2 is high note priority.
  • VCF (Voltage Controlled Filter)
    • Types: Low pass (I: 12 dB/oct., II III: 24 dB/oct.)
    • Frequency Range: 16 Hz – 16 kHz
    • Maximum Usable Q: 30
    • Resonance: 1/2 – self oscillate
    • Voltage Controlled Response:
      • C3 key (left edge): 0 V 
      • C6 key (right edge) 3 V
  • VCA (Voltage Controlled Amplifier)
    • Dynamic Range:80 dB
  • Ring Modulator
    • Type: Digital
    • Input Signal: VCO-1, VCO-2 (square wave)
  • Sample & Hold:
    • Command Sources: Keyboard or LFO trigger
    • Sampled Signals: VCO-1 sawtooth wave and square wave, VCO-2 square wave and pink noise
  • ADSR Envelope Generator
    • Attack Time:5 msec. – 5 sec.
    • Decay Time: 10 msec. – 8 sec.
    • Sutatin Level: 0 – 100 % or Peak
    • Release Time:15 msec. – 10 sec.
  • AR Envelope Generator
    • Attack Time:5 msec. – 5 sec.
    • Release Time: 10 msec. – 8 sec.
  • Control Input Jacks
    • Pedal:6.3 mm monaural phone jack
    • Portamento Foot Switch:6.3 mm monaural phone jack
  • Audio Output Jacks
    LOW

    • Connector:6.3 mm monaural phone jack
    • Maximum Output Level:-20 dBu@ 10 k ohm load
    • Output Impedance: 10 k ohm
  • Audio Output Jacks
    HIGH

    • Connector :XLR connector
    • aximum Output Level: +4 dBu@ 1 k ohm load
    • Output Impedance:330 ohm
  • Headphones Jack
    • Connector:6.3 mm stereo phone jack
    • Maximum Output Level:50 mW + 50 mW@ 33 ohm load
    • Output Impedance:10 ohm,* Controllable by volume knob.
  • External Audio Input (Ext Audio Input) Jack
    • Connector:6.3 mm monaural phone jack
    • Maximum Input Level:-10 dBu
    • Input Impedance:22 k ohm
  • MIDI Connector: IN
  • USB Connector: Type B
  • CV IN/OUT Jacks
    • Keyboard CV (IN/OUT):1 V/oct.
    • Connector:3.5 mm monaural phone jack
  • GATE IN/OUT Jacks
    • GATE IN:+3 V (minimum)
    • GATE OUT:+10 V, key down; 0 V all keys up
    • Connector:3.5 mm monaural phone jack
  • TRIG IN/OUT Jacks
    • TRIG IN:+3 V pulse min., 10 μsec. Duration minimum
    • TRIG OUT:+10 V pulse on key depression, 10 μsec. Duration
    • Connector:3.5 mm monaural phone jack
  • Power Supply:AC adapter jack (DC 9V)
  • Power Consumption:6.5 W
  • Dimensions (W x D x H): 496 x 265 x 89 mm / 19.53” x 10.43” x 3.50”
  • Weight:3.7 kg / 8.16 lbs
  • Design Variations:White (ARP ODYSSEY Module Rev1), Black and Orange (ARP ODYSSEY Module Rev3)
  • Included Items:AC adapter, phone cable, mini-phone cable
  • Accessories
    • Expression/Volume Pedal:XVP-20
    • Volume Pedal:VP-10
    • Pedal Switch:PS-3
    • Pedal Switch: PS-1
    • Patch Cables:SQ-CABLE-6

Reviews

There are no reviews yet.

Be the first to review “KORG ARP ODYSSEY MODULE 1 SYNTHESIZER”